Job Openings in Champaign County, Ohio

Slitting Operator - 3rd Shift

10/7/2020

Weidmann Electrical Technology is now hiring.

Responsible for operating and monitoring all converting slitting, rewind, cuffer/creaser machines to achieve optimum productivity while maintaining high standards of quality, safety and efficiency.

Click here to learn more & apply today!

Mechanicsburg Seeking Water Operator

9/15/2020

0 Comments

The Village of Mechanicsburg is seeking a Water Operator with a Class I Water license and a Wastewater Operator with a Class II Wastewater license.

The successful candidate(s) will be in charge of the plants and work with the existing staff to operate and maintain the facilities. Position can be full time for an Operator with both W/WW license – 40 hours per week. This would be a salaried position. If Operators were hired separately this could be part time hourly position. Emergency work, weekend work and evening work will be required. Rate of pay is competitive but dependent on experience and certifications. Mechanicsburg is an EOE.

0 Comments

Village of Mechanicsburg Seeking Part Time Heavy Equipment Operator

9/10/2020

0 Comments

The Village of Mechanicsburg is accepting applications for a Part time as needed Heavy Equipment Operator position. Must have three (3) years of experience in construction and maintenance work. A valid commercial driver’s license with appropriate endorsements is desired. Candidate must have experience operating a backhoe in and around tight areas, including existing utilities. Pay range is wage $30.00 to $35.00 per hour. A complete job description and application for employment are available at the Mechanicsburg Municipal Building, 18 N Main St Mechanicsburg OH. Mechanicsburg is an EOE.

0 Comments

Converting Operator -3rd

6/18/2020

The Weidmann Group is an ESSENTIAL BUSINESS, HIRING NOW*
3rd shift 11PM - 7AM

Job Definition: Responsible for operating and monitoring machines to achieve optimum productivity while maintaining high standards or quality, safety and
efficiency.

JOB RESPONSIBILITIES:

Start up and situate assigned machine per customer/order specification
Troubleshoot and adjust machine controls and components
Ability to perform change overs, including blade changes
Communicate with other departments to request raw material and supplies to eliminate need for downtime
Document and explain all production data according to procedures into SAP
Observe operation of machine to detect and correct machine malfunctions
Perform quality inspections
Maintain clean work environment and document housekeeping and 5S compliance
Complete routine maintenance on assigned tools, devices and equipment
Adhere to company safety regulations

Note: Other duties may be required

JOB REQUIREMENTS:

High School Diploma or GED
Two years manufacturing experience
Comprehend and apply basic reading, arithmetic and geometry
Ability to use precision measuring equipment such as a ruler, tape measure, caliper and micrometer
Ability to read blueprints and apply them to the job
Must be able to multi-task and work with little supervision in a team environment
Willingness to take on responsibilities and challenges
Physical requirements – lift and manipulate unwieldy parts weighing approximately 80 lbs up to 100 lbs. Ability to push and pull 100 lbs on own
Physical requirements to work in an unclimate-controlled environment
Basic keyboarding skills and basic knowledge of computer operations
Ability to train others

Go to the link below apply!

https://www.dayforcehcm.com/CandidatePortal/en-US/wicor

Utility Operator Paper Machine

6/18/2020

The Weidmann Group is an ESSENTIAL BUSINESS, HIRING NOW*

This is a rotating, swing shift position*

$17/hr

JOB SUMMARY:
As a member of the Urbana team you will be relied upon to achieve optimum productivity while maintaining high standards of quality, safety and efficiency. Responsibilities include the ability to work safety including but not limited to following company policies and procedures, adhering to machine specific and personal safety and environmental regulations. Retrieve order specs, documentation and data from SAP; conduct order changes and set ups, operate/maintain to assigned productivity standards; control and operate QCS/DCS system; follow job specific procedures during pape machine shut down; cut and/or set cores; assist with paper machine operations and stock prep area; assist Flex Operator when required; process rolls to customer specifications; move material to and around paper mill and stock prep area. Assist in machine maintenance and perform periodic maintenance to machine. Have the ability to qualify and fill-in for Flex Operator.

QUALIFICATIONS:
Manufacturing experience required (paper
experience preferred). Ability to work swing shift and be trained on multiple positions. Effectively utilize SAP. Demonstrated ability to lead and participate in team based activities. Comprehend and apply basic reading, arithmetic and geometry (testing required). Possess WEIDMANN Forklift Permit and Crane Operating Permit. Ability to use a tape measure and precision measuring equipment. Ability to read diagrams, work instructions and apply them to job. Must be able to multi-task and work with little supervision in a team environment. Willingness to take on responsibilities and challenges. Physical requirements – lift and manipulate unwieldy parts weighing approximately 75 pound range up to 100 lbs. with help. Ability to push/pull 60 pounds on own. Physical requirement to work in a un-climate controlled environment. Basic keyboarding skills and basic knowledge of computer operations. Ability to work up to a maximum of 16 hours in a day. Required to train on multiple jobs.

Go to the link below apply!

https://www.dayforcehcm.com/CandidatePortal/en-US/wicor

Rewinder Operator - 2nd Shift

6/15/2020

The Weidmann Group is an ESSENTIAL BUSINESS HIRING NOW.
*2nd shift 3PM - 11PM

Job Definition: Responsible for operating and monitoring all rewind, machines to achieve optimum productivity while maintaining high standards or quality, safety and
efficiency.

JOB RESPONSIBILITIES:

Start up and situate assigned machine per customer/order specification
Troubleshoot and adjust machine controls and components
Ability to perform change overs, including blade changes
Communicate with other departments to request raw material and supplies to eliminate need for downtime
Document and explain all production data according to procedures into SAP
Observe operation of machine to detect and correct machine malfunctions
Perform quality inspections
Maintain clean work environment and document housekeeping and 5S compliance
Complete routine maintenance on assigned tools, devices and equipment
Adhere to company safety regulations

Note: Other duties may be required

JOB REQUIREMENTS:

High School Diploma or GED
Two years manufacturing experience
Comprehend and apply basic reading, arithmetic and geometry
Ability to use precision measuring equipment such as a ruler, tape measure,

caliper and micrometer

Ability to read blueprints and apply them to the job
Must be able to multi-task and work with little supervision in a team environment
Willingness to take on responsibilities and challenges
Physical requirements – lift and manipulate unwieldy parts weighing approximately 80 lbs up to 100 lbs. Ability to push and pull 100 lbs on own
Physical requirements to work in an unclimate-controlled environment
Basic keyboarding skills and basic knowledge of computer operations
Ability to train others

Go to the link below apply!

https://www.dayforcehcm.com/CandidatePortal/en-US/wicor

Utility Operator

6/11/2020

The Weidmann Group is now hiring.

ESSENTIAL BUSINESS HIRING NOW*
This is a rotating, swing shift position*
Pay starts out at $17/hr*

JOB SUMMARY: As a member of the Urbana team you will be relied upon to achieve optimum productivity while maintaining high standards of quality, safety and
efficiency. Responsibilities include the ability to work safety including but not limited to following company policies and procedures, adhering to machine specific and personal safety and environmental regulations. Retrieve order specs, documentation and data from SAP; conduct order changes and set-ups,
operate/maintain to assigned productivity standards; control and
operate QCS/DCS system; follow job specific procedures during pape machine
shut down; cut and/or set cores; assist with paper machine operations and stock prep area; assist Flex Operator when required; process rolls to customer specifications; move material to and around paper mill and stock prep area. Assist in machine maintenance and perform periodic maintenance to machine. Have the ability to qualify and fill-in for Flex Operator.
QUALIFICATIONS: Manufacturing experience required (paper experience preferred). Ability to work swing shift and be trained on multiple positions. Effectively utilize SAP. Demonstrated ability to lead and participate in team based activities. Comprehend and apply basic reading, arithmetic and geometry (testing required). Possess WEIDMANN Forklift Permit and Crane Operating Permit. Ability to use a tape measure and precision measuring equipment. Ability to read diagrams, work instructions and apply them to job. Must be able to multi-task and work with little supervision in a team environment. Willingness to take on responsibilities and challenges. Physical requirements – lift and manipulate unwieldy parts weighing approximately 75 pound range up to 100 lbs. with help. Ability to push/pull 60 pounds on own. Physical requirement to work in a un-climate controlled environment. Basic keyboarding skills and basic knowledge of computer operations. Ability to work up to a maximum of 16 hours in a day. Required to train on multiple jobs.

Go to the link below apply!

https://www.dayforcehcm.com/CandidatePortal/en-US/wicor